信州ギター祭り2025 主要ブランド制作ブログ公開中!

EarthQuaker Devicesの歪み系エフェクターが毎月一台ずつ数量限定で復刻 今月は名機オクターブファズの進化版 = Fuzz Master General Legacy Reissue

  • ブックマーク
EarthQuaker Devicesの歪み系エフェクターが毎月一台ずつ数量限定で復刻 今月は名機オクターブファズの進化版 = Fuzz Master General Legacy Reissue

記事中に掲載されている価格・税表記および仕様等は予告なく変更することがあります。

EarthQuaker Devicesが2025年8⽉から毎⽉1台、計8台の歪み系エフェクターを台数限定で復刻します。
⽇本国内限定(数量限定)シリーズで、⽇本未上陸のモデルから惜しまれつつ廃番になったモデルまで、この機会を逃すと今後の⼊⼿が困難となる可能性がある希少なシリーズです。
発売予定はこちら。

発売予定月型名種類
2025年8月Fuzz Master GeneralOctave Fuzz Blaster
9月BellowsFuzz Driver
10月Tone ReaperTone Reaper
11月Crimson DriveGermanium Overdrive
12月DunesOverdrive
2026年1月TalonsHigh Gain Overdrive
2月TerminalsDestructive Fuzz
3月Cloven HoofFuzz Grinder

第一弾となる今月は「Fuzz Master General Legacy Reissue」。
Ace Tone Fuzz Master FM-2 Professionalを基にしたオクターブファズペダルです。
ファズサウンドの幅広さやクリッピング方式の選択、精緻なトーンコントロールが特徴で、現代的な使いやすさと往年の個性が両立します。
多様なジャンルやプレイスタイルに応じた表現力を持った一台です。

EarthQuaker Devices Fuzz Master General Legacy Reissue

メーカーEarthQuaker Devices
型名Fuzz Master General
販売価格¥33,000(税込)
JAN0810019915048
発売予定日2025年8⽉23⽇(⼟)
備考⽇本国内限定(数量限定)

特徴

柔軟なクリッピング方式で多彩なファズ・オクターブサウンド

三段階のVoiceトグルスイッチによって、ゲルマニウム、シリコン、ダイオード非接続という3つのクリッピング方式を選択可能です。
ゲルマニウムクリッピングでは、余裕のある開放的なファズサウンド、シリコンクリッピングではタイトでコンプレッション感のあるサウンドを得ることができます。
ダイオード非接続の中央ポジションでは、クリーンなオクターブアップ効果やリングモジュレーションに近い音色表現も演出可能です。

拡張されたコントロールで理想の音作りを実現

Fuzzコントロールは広い可変範囲を持ち、クリーンから非常に過激なファズまで精密な調整が可能です。
トーンコントロールも連続可変に進化しており、煌びやかなトレブルブーストから、ローを強調したヴィンテージトーンまで、幅広いバリエーションを実現しています。

現代のプレイヤーに応える再設計

オリジナルモデルの質感やオクターブ感はそのままに、現代的な演奏シーンに適応するための新たな機能を搭載。
多様な楽器への対応力を持ち、ギターはもちろん、ベースやシンセサイザーでも新たな表現を可能としています。
多彩なニーズに応える、表現力豊かなファズペダルです。

仕様

仕様を見る

Dimensions

4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw

10 mA

Input Impedance

15 kΩ

Output Impedance

<1 kΩ

Flexi-Switch® Technology

This device features Flexi-Switch® Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

• For standard latching operation: tap the footswitch once to activate the effect and then tap again to bypass.

• For momentary operation: hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay-based, it requires power to pass signal.

Power

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Artwork

Artwork by Matt Horak.

関連記事

信州ギター祭り2025 主要ブランド制作ブログ公開中!
  • ブックマーク